ClimaShield Spray Foam

Commercial Spray Foam Insulation in Western PA

Insulation. Air barrier. Vapor barrier. One spray. Done.

ClimaShield installs exclusively closed-cell spray foam — the only insulation that delivers R7/inch, seals air leaks, and blocks moisture in a single application. Four suppliers. One specialist crew. Serving Western PA.

~R7

Per inch of
closed-cell foam

4

Foam system
suppliers

80+yr

Closed-cell
lifespan

Get a Free Project Consultation

Speak directly with an insulation specialist about your building.

X/Twitter

This field is for validation purposes and should be left unchanged.

Name(Required)

First Last

Email(Required)

Phone(Required)

Message(Required)

No obligation. We’ll follow up within one business day.

Why Closed-Cell Spray Foam

Three Problems. One Pass.

Most buildings need three separate products — insulation for R-value, a membrane for air sealing, and a vapor barrier for moisture control. Closed-cell spray foam replaces all three in a single application.

01 Premium Insulation

~R7 per inch at 2.0 lb density

Nearly double the R-value of open-cell foam. Exceeds code in most wall assemblies without the thickness traditional insulation requires.

02 Continuous Air Barrier

Qualifies as air barrier per building code

Eliminates uncontrolled air leakage — the primary cause of energy loss in commercial buildings. No gaps, no seams, no missed spots.

03 Vapor Retarder

Class II at 2" thickness (~0.1 perm)

Blocks moisture penetration that causes mold, rot, and insulation degradation. Critical for PA’s climate zone (4A/5A) where moisture drives building failures.

One product. Three jobs. Fewer trades. Better performance.

Applications

We Spec the Right Foam for Every Application

NCFI, Huntsman, BASF, and Carlisle — we carry systems from four manufacturers so we match the chemistry to the project, not the other way around.

Walls & Cavities

Open stud walls, cavity fill, and continuous exterior insulation. Eliminates thermal bridging at framing members.

Metal Buildings & Pole Barns

Spray directly to steel panels, eliminating condensation, thermal bridging at girts/purlins, and air infiltration through panel seams.

Rooflines & SPF Roofing Substrate

Under-deck insulation for attics and cathedral ceilings. Plus 2.5-3.0 lb closed-cell foam as roofing substrate for commercial low-slope roofs — our roofing division applies the topcoat.

Our Process

How a Spray Foam Project Works

From assessment to documentation — here’s how we deliver insulation that performs for the life of the building.

Project Assessment

We evaluate your building — substrate conditions, existing insulation, moisture concerns, code requirements — and spec the right foam system.

Preparation

Substrate prep, masking and protection, temperature and humidity verification. Proper conditions are non-negotiable for adhesion and cure.

Spray Application

Closed-cell foam applied in controlled lift thicknesses. Each pass builds R-value, air sealing, and vapor control simultaneously.

Verification & Documentation

Thickness measurements verify R-value delivery. Every project photographed and documented through CompanyCam — your permanent proof of quality.

The Building Envelope Company

One Company. Every Surface Protected.

ClimaShield Spray Foam is one division of ClimaShield Industries. When your building needs more than insulation, we have you covered — literally.

Spray Foam Insulation

Walls, rooflines, crawl spaces, rim joists. Closed-cell only.

Floor Coatings

Epoxy, polyaspartic, urethane cement, polished concrete.

Commercial Roofing

Conklin, Castagra, PPG/VersaFlex coating systems over SPF substrate.

Protective Coatings

Industrial steel, tank linings, and specialty protective applications.

HubZone certified. Woman-owned. Four divisions.
Why manage four contractors when one company protects every surface?

Industries We Serve

From Your Loading Dock to Your Showroom Floor

Every facility has different demands. We spec the right system for each one.

Metal Buildings & Pole Barns

Condensation control, thermal bridging elimination, and R-value in one pass.

Warehouses & Distribution

Large-scale insulation for temperature-sensitive storage and energy reduction.

Agricultural & Farm Buildings

Livestock comfort, produce storage, and equipment protection from moisture.

Offices & Commercial

Comfort, noise reduction, and energy efficiency for occupied commercial spaces.

Churches & Institutional

Large open volumes, cathedral ceilings, and historic building retrofits.

Commercial Roofing (SPF Substrate)

2.5-3.0 lb closed-cell foam as roofing substrate. Our roofing division applies the topcoat.

Why ClimaShield

Other Contractors Offer Five Insulation Types. We Perfected One.

Closed-Cell Exclusively

No open-cell. No fiberglass. No blown-in. We install the premium product and nothing else — so our crew's expertise runs deep.

Four Supplier Relationships

NCFI, Huntsman, BASF, and Carlisle. We spec the right foam chemistry for your project — not whatever's on the truck.

Building Envelope Company

Backed by ClimaShield Industries — spray foam, floor coatings, commercial roofing, and protective coatings. One company, every surface.

Documented Proof, Every Project

CompanyCam documentation on every job — thickness measurements, before/during/after photos. We don't hide our work behind drywall.

"We use ClimaShield for our spray foam needs on a variety of projects with great success. We always get a top notch product with ClimaShield!"

Brett Bloxdorf

Owner — Bloxdorf Construction

Improve Your Building's Efficiency